preparing for netbox

This commit is contained in:
randomuser 2023-07-07 23:44:40 -05:00
parent c8c9826dd0
commit 1da95b53c1
7 changed files with 181 additions and 259 deletions

View File

@ -3,6 +3,7 @@
let let
hostname = "virtbox"; hostname = "virtbox";
isVirtbox = hostname == "virtbox"; isVirtbox = hostname == "virtbox";
isNetbox = hostname == "netbox";
in in
{ {
imports = imports =
@ -12,7 +13,7 @@ in
./netbox.nix ./netbox.nix
]; ];
networking.networkmanager.enable = true; # Easiest to use and most distros use this by default. networking.networkmanager.enable = true;
time.timeZone = "America/Chicago"; time.timeZone = "America/Chicago";
@ -27,14 +28,20 @@ in
curl curl
htop htop
git git
tree
dig
htop
]; ];
system.copySystemConfiguration = true; system.copySystemConfiguration = true;
system.stateVersion = "23.05"; # don't change this, lol system.stateVersion = "23.05"; # don't change this, lol
# branch and enable different capabilities based on the system # branch and enable different capabilities based on the system
test = lib.mkIf isVirtbox { test = lib.mkIf isVirtbox {
services.virtbox.enable = true; services.virtbox.enable = true;
}; };
test = lib.mkIf isNetbox {
services.netbox.enable = true;
};
} }

View File

@ -1,38 +0,0 @@
# Do not modify this file! It was generated by nixos-generate-config
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/profiles/qemu-guest.nix")
];
boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "sr_mod" "virtio_blk" ];
boot.initrd.kernelModules = [ ];
boot.kernelModules = [ "kvm-intel" ];
boot.extraModulePackages = [ ];
fileSystems."/" =
{ device = "/dev/disk/by-uuid/348bd40a-08e7-48e4-aad7-d4fe002e9dc0";
fsType = "ext4";
};
fileSystems."/boot" =
{ device = "/dev/disk/by-uuid/f161dbd9-52f3-4d04-b327-dbcf74cc44fd";
fsType = "ext4";
};
swapDevices =
[ { device = "/dev/disk/by-uuid/9349bfd4-d7f0-4e0d-b485-5e897d2d1e7b"; }
];
# Enables DHCP on each ethernet and wireless interface. In case of scripted networking
# (the default) this is the recommended approach. When using systemd-networkd it's
# still possible to use this option, but it's recommended to use it in conjunction
# with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
networking.useDHCP = lib.mkDefault true;
# networking.interfaces.enp1s0.useDHCP = lib.mkDefault true;
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
}

37
mail.nix Normal file
View File

@ -0,0 +1,37 @@
{ config, pkgs, ... }:
let
release = "nixos-23.05";
cfg = config.services.nixosmail;
in {
options.services.nixosmail = {
enable = mkEnableOption "NixOS mail server";
};
imports = [
(builtins.fetchTarball {
url = "https://gitlab.com/simple-nixos-mailserver/nixos-mailserver/-/archive/${release}/nixos-mailserver-${release}.tar.gz";
# This hash needs to be updated
sha256 = "1ngil2shzkf61qxiqw11awyl81cr7ks2kv3r3k243zz7v2xakm5c";
})
];
config = mkIf cfg.enable {
mailserver = {
enable = true;
fqdn = "mail.beepboop.systems";
domains = [ "beepboop.systems" ];
loginAccounts = {
"ryan@beepboop.systems" = {
# nix-shell -p mkpasswd --run 'mkpasswd -sm bcrypt' > /hashed/password/file/location
hashedPasswordFile = "/etc/ryan-beepboop-systemsuser-pass";
aliases = [
"info@beepboop.systems"
"postmaster@beepboop.systems"
];
};
};
certificateScheme = "acme-nginx";
};
};
}

135
netbox.nix Normal file
View File

@ -0,0 +1,135 @@
{ lib, config, pkgs, ... }:
with lib;
let
cfg = config.services.netbox;
in {
options.serviecs.netbox = {
enable = mkEnableOption "netbox configs";
};
imports =
[
./mail.nix
];
config = mkIf cfg.enable {
boot.loader.grub.enable = true;
boot.loader.grub.device = "/dev/vda";
networking.hostName = "netbox";
users.users.useracc = {
isNormalUser = true;
extraGroups = [ "wheel" "docker" ];
};
environment.systemPackages = with pkgs; [
# nothing more needed, at the moment
];
services.openssh = {
enable = true;
ports = [55555];
};
networking.usePredictableInterfaceNames = false;
services.nixosmail.enable = true;
services.gitea = {
enable = true;
appName = "crappy code"; # Give the site a name
database = {
type = "postgres";
passwordFile = "/etc/gittea-pass";
};
settings.server = {
DOMAIN = "git.beepboop.systems";
ROOT_URL = "https://git.beepboop.systems/";
HTTP_PORT = 3001;
};
};
services.postgresql = {
enable = true; # Ensure postgresql is enabled
authentication = ''
local gitea all ident map=gitea-users
'';
identMap = # Map the gitea user to postgresql
''
gitea-users gitea gitea
'';
};
services.nginx.enable = true;
services.nginx.clientMaxBodySize = "100m";
services.nginx.virtualHosts."beepboop.systems" = {
forceSSL = true;
enableACME = true;
root = "/var/www/beepboop.systems";
};
services.nginx.virtualHosts."git.beepboop.systems" = {
forceSSL = true;
enableACME = true;
locations."/".proxyPass = "http://localhost:3001";
};
services.nginx.virtualHosts."paperless.beepboop.systems" = {
forceSSL = true;
enableACME = true;
locations."/".proxyPass = "http://localhost:3004";
};
services.nginx.virtualHosts."bitwarden.beepboop.systems" = {
forceSSL = true;
enableACME = true;
locations."/" = {
proxyPass = "http://127.0.0.1:8000";
};
};
services.nginx.virtualHosts."skillissue.agency" = {
forceSSL = true;
enableACME = true;
root = "/var/www/skillissue.agency";
};
security.acme = {
acceptTerms = true;
email = "nickforanick@protonmail.com";
};
services.roundcube = {
enable = true;
# this is the url of the vhost, not necessarily the same as the fqdn of
# the mailserver
hostName = "cube.beepboop.systems";
extraConfig = ''
# starttls needed for authentication, so the fqdn required to match
# the certificate
$config['smtp_server'] = "tls://${config.mailserver.fqdn}";
$config['smtp_user'] = "%u";
$config['smtp_pass'] = "%p";
'';
};
services.paperless = {
enable = true;
passwordFile = "/etc/paperless-password";
port = 3004;
address = "localhost";
extraConfig = {
PAPERLESS_URL = "https://paperless.beepboop.systems";
};
};
services.vaultwarden.enable = true;
# Open ports in the firewall.
networking.firewall.enable = false;
networking.firewall.allowedTCPPorts = [ 55555 80 443 ];
};
}

View File

@ -1,154 +0,0 @@
{ config, pkgs, ... }:
{
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
./mail.nix
];
# Use the GRUB 2 boot loader.
boot.loader.grub.enable = true;
# boot.loader.grub.efiSupport = true;
# boot.loader.grub.efiInstallAsRemovable = true;
# boot.loader.efi.efiSysMountPoint = "/boot/efi";
# Define on which hard drive you want to install Grub.
boot.loader.grub.device = "/dev/vda"; # or "nodev" for efi only
networking.hostName = "netbox"; # Define your hostname.
# Pick only one of the below networking options.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
# Set your time zone.
# time.timeZone = "Europe/Amsterdam";
# Configure network proxy if necessary
# networking.proxy.default = "http://user:password@proxy:port/";
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
# Select internationalisation properties.
i18n.defaultLocale = "en_US.UTF-8";
# console = {
# font = "Lat2-Terminus16";
# keyMap = "us";
# useXkbConfig = true; # use xkbOptions in tty.
# };
# Enable the X11 windowing system.
# services.xserver.enable = true;
# Configure keymap in X11
# services.xserver.layout = "us";
# services.xserver.xkbOptions = "eurosign:e,caps:escape";
# Enable CUPS to print documents.
# services.printing.enable = true;
# Enable sound.
# sound.enable = true;
# hardware.pulseaudio.enable = true;
# Enable touchpad support (enabled default in most desktopManager).
# services.xserver.libinput.enable = true;
# Define a user account. Don't forget to set a password with passwd.
users.users.useracc = {
isNormalUser = true;
extraGroups = [ "wheel" ]; # Enable sudo for the user.
};
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
neovim
curl
git
tree
dig
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = {
# enable = true;
# enableSSHSupport = true;
# };
# List services that you want to enable:
# Enable the OpenSSH daemon.
services.openssh = {
enable = true;
ports = [55555];
};
networking.usePredictableInterfaceNames = false;
services.gitea = {
enable = true;
appName = "crappy code"; # Give the site a name
database = {
type = "postgres";
passwordFile = "/etc/gittea-pass";
};
domain = "git.beepboop.systems";
rootUrl = "https://git.beepboop.systems/";
httpPort = 3001;
};
services.postgresql = {
enable = true; # Ensure postgresql is enabled
authentication = ''
local gitea all ident map=gitea-users
'';
identMap = # Map the gitea user to postgresql
''
gitea-users gitea gitea
'';
};
services.nginx.enable = true;
services.nginx.virtualHosts."beepboop.systems" = {
addSSL = true;
enableACME = true;
root = "/var/www/beepboop.systems";
};
services.nginx.virtualHosts."mail.beepboop.systems" = {
addSSL = true;
enableACME = true;
root = "/var/www/mail.beepboop.systems";
};
services.nginx.virtualHosts."git.beepboop.systems" = {
addSSL = true;
enableACME = true;
locations."/".proxyPass = "http://localhost:3001";
};
security.acme = {
acceptTerms = true;
email = "nickforanick@protonmail.com";
};
# Open ports in the firewall.
networking.firewall.enable = false;
networking.firewall.allowedTCPPorts = [ 55555 80 443 ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Copy the NixOS configuration file and link it from the resulting system
# (/run/current-system/configuration.nix). This is useful in case you
# accidentally delete configuration.nix.
# system.copySystemConfiguration = true;
# This value determines the NixOS release from which the default
# settings for stateful data, like file locations and database versions
# on your system were taken. It's perfectly fine and recommended to leave
# this value at the release version of the first install of this system.
# Before changing this value read the documentation for this option
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
system.stateVersion = "23.05"; # Did you read the comment?
}

View File

@ -1,37 +0,0 @@
# Do not modify this file! It was generated by nixos-generate-config
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports = [ ];
boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "sr_mod" "virtio_blk" ];
boot.initrd.kernelModules = [ ];
boot.kernelModules = [ ];
boot.extraModulePackages = [ ];
fileSystems."/" =
{ device = "/dev/disk/by-uuid/a57b82ca-7bfd-458e-b3e8-4962511cc0b8";
fsType = "ext4";
};
fileSystems."/boot" =
{ device = "/dev/disk/by-uuid/DF39-1ECE";
fsType = "vfat";
};
swapDevices =
[ { device = "/dev/disk/by-uuid/57fbd850-1ced-4e21-9e52-4f3b529c61b0"; }
];
# Enables DHCP on each ethernet and wireless interface. In case of scripted networking
# (the default) this is the recommended approach. When using systemd-networkd it's
# still possible to use this option, but it's recommended to use it in conjunction
# with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
networking.useDHCP = lib.mkDefault true;
# networking.interfaces.ens3.useDHCP = lib.mkDefault true;
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
virtualisation.hypervGuest.enable = true;
}

View File

@ -1,28 +0,0 @@
{ config, pkgs, ... }:
let release = "nixos-23.05";
in {
imports = [
(builtins.fetchTarball {
url = "https://gitlab.com/simple-nixos-mailserver/nixos-mailserver/-/archive/${release}/nixos-mailserver-${release}.tar.gz";
# This hash needs to be updated
sha256 = "1ngil2shzkf61qxiqw11awyl81cr7ks2kv3r3k243zz7v2xakm5c";
})
];
mailserver = {
enable = true;
fqdn = "mail.beepboop.systems";
domains = [ "beepboop.systems" ];
loginAccounts = {
"ryan@beepboop.systems" = {
# nix-shell -p mkpasswd --run 'mkpasswd -sm bcrypt' > /hashed/password/file/location
hashedPasswordFile = "/etc/ryan-beepboop-systemsuser-pass";
aliases = [
"info@beepboop.systems"
"postmaster@beepboop.systems"
];
};
};
};
}