update readme + sh/capture

.gitignore

@@ -1,3 +1,2 @@
 .environment
 .firefox_env
-hardware-configuration.nix

LICENSE

@@ -617,59 +617,3 @@ reviewing courts shall apply local law that most closely approximates
 an absolute waiver of all civil liability in connection with the
 Program, unless a warranty or assumption of liability accompanies a
 copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attac
100 35149  100 35149    0     0   145k      0 --:--:-- --:--:-- --:--:--  145k
-h the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.

README.md

@@ -1,26 +1,35 @@
 randomuser's dotfiles
 =====================
 
-here's some dotfiles!
+![an image of the desktop while editing this repo's flake.nix](./demo.png)
 
-some features
+features
+--------
 
-- ``bspwm`` + ``sxhkd``
+- `bspwm` + `sxhkd` + `st` + `firefox`
-- ``tmenu``: terminal based ``dmenu`` replacement
+- most everything on the desktop save for the browser, media viewers, and desktop background, is a terminal
-- uses ``pash``, the password manager
+- on the server, runs gitea + simple-nixos-mailserver
-- no flakes (can't figure it out, lol)
+- built with NixOS flakes
 
-some future things to work on are
+installation
+------------
 
-- remove ``polybar`` with a simpler, homegrown solution
+`sudo nixos-rebuild --flake .#your-flake-name-here switch`
-- integrate a dynamic color switching mechanism
-	- make these more appealing, in general
-	- without compromising speed and system load
-- compatibility with 'traditional' unix systems
 
-license.
+if you're trying to install `virtbox`, then use the `--impure` flag:
 
-- boring legal stuff for most items in this configuration are in the LICENSE file.
+`sudo nixos-rebuild --flake .#virtbox switch --impure`
-	- under the GPLv3
+
-	- everything under ``config/*``, ``builds/*``, and ``modules/*``, in addition to all files that are ``*.nix``.
+for alternate installations on non-NixOS hosts, a Makefile will be made available
-	- NOT in ``wallpapers/*``, those are unlicensed and their legal status is unknown
+
+things to do
+------------
+
+- integrate `disko` and `sops-nix` into the setup
+- switch from gitea to cgit
+- establish backup infrastructure for `netbox`
+
+license
+-------
+
+all materials, except `./home/wallpapers/pape.jpg`, is licensed under the GPLv3. the licensing status of `pape.jpg` is unknown.

boxes/iso.nix

@@ -1,10 +0,0 @@
-{ config, pkgs, ... }:
-{
-  imports = [
-    <nixpkgs/nixos/modules/installer/cd-dvd/installation-cd-minimal.nix>
-
-    # Provide an initial copy of the NixOS channel so that the user
-    # doesn't need to run "nix-channel --update" first.
-    <nixpkgs/nixos/modules/installer/cd-dvd/channel.nix>
-  ];
-}

boxes/mainsail/default.nix

@@ -0,0 +1,46 @@
+{ lib, config, pkgs, ...}:
+{
+  imports = [
+    ./hardware-configuration.nix
+    ./server.nix
+    ../../modules/bootstrap.nix
+    ../../modules/common.nix
+    ../../modules/x11.nix
+    ../../modules/discord.nix
+  ];
+
+  boot.loader.grub.enable = true;
+  boot.loader.grub.device = "/dev/sda";
+
+  networking.hostName = "mainsail";
+
+  services.getty.greetingLine = "
+    welcome to mainsail    |`-:_
+  ,----....____            |    `+.
+ (             ````----....|___   |
+  \\     _                      ````----....____
+   \\    _)                                     ```---.._
+    \\                                                   \\
+  )`.\\  )`.   )`.   )`.   )`.   )`.   )`.   )`.   )`.   )`.   )`.
+-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `
+  ";
+
+  environment.systemPackages = with pkgs; [
+    vscodium-fhs
+    libreoffice
+
+    anki-bin
+    ytfzf
+    kdenlive
+    libreoffice
+    i3
+    gcc
+    gnumake
+
+    scrcpy
+    thunderbird
+    mepo
+  ];
+
+  system.stateVersion = "23.11";
+}

boxes/mainsail/hardware-configuration.nix

@@ -0,0 +1,31 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "sr_mod" "virtio_blk" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/7b70ab88-296c-4737-90b2-267cb2432dc1";
+      fsType = "ext4";
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp1s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

boxes/mainsail/home.nix

@@ -0,0 +1,9 @@
+{ lib, inputs, config, pkgs, home, ... }:
+
+{
+  imports = [
+    ../../home/x11.nix
+  ];
+
+  home.stateVersion = "23.11";
+}

boxes/mainsail/server.nix

@@ -1,15 +1,5 @@
 { lib, config, pkgs, ...}:
 {
-  imports = [
-    ../common/steam.nix
-    ../common/desktop.nix
-  ];
-
-  boot.loader.grub.enable = true;
-  boot.loader.grub.device = "/dev/sda";
-
-  networking.hostName = "mainsail";
-
   services.paperless = {
     enable = true;
     passwordFile = "/etc/paperless-password";
@@ -52,34 +42,6 @@
   systemd.targets.hibernate.enable = false;
   systemd.targets.hybrid-sleep.enable = false;
 
-  services.getty.greetingLine = "
-    welcome to mainsail    |`-:_
-  ,----....____            |    `+.
- (             ````----....|___   |
-  \\     _                      ````----....____
-   \\    _)                                     ```---.._
-    \\                                                   \\
-  )`.\\  )`.   )`.   )`.   )`.   )`.   )`.   )`.   )`.   )`.   )`.
--'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `
-  ";
-
-  environment.systemPackages = with pkgs; [
-    vscodium-fhs
-    libreoffice
-
-    anki-bin
-    ytfzf
-    kdenlive
-    libreoffice
-    i3
-    gcc
-    gnumake
-
-    scrcpy
-    thunderbird
-    mepo
-  ];
-
   systemd.services.paperless-web-bridge = {
     script = ''
       ${pkgs.openssh}/bin/ssh -v -NR 3004:localhost:3004 -oExitOnForwardFailure=yes -p 55555 useracc@beepboop.systems

boxes/mlg/default.nix

@@ -2,10 +2,13 @@
 
 {
   imports = [
-    ../common/desktop.nix
+#    ./hardware-configuration.nix
-    ../common/nvidia.nix
+    ./nvidia.nix
-    ../common/gaming.nix
+    ../../modules/bootstrap.nix
-    ../common/steam.nix
+    ../../modules/common.nix
+    ../../modules/x11.nix
+    ../../modules/discord.nix
+    ../../modules/gaming.nix
   ];
 
   environment.systemPackages = with pkgs; [

boxes/netbox/default.nix

@@ -3,13 +3,52 @@
 {
   imports =
     [
-      ../modules/mail.nix
+      ./hardware-configuration.nix
-      ../common/main.nix
+      ../../modules/bootstrap.nix
     ];
 
+  networking.networkmanager.enable = true;
+
+  time.timeZone = "America/Chicago";
+
+  i18n.defaultLocale = "en_US.UTF-8";
+  console = {
+    font = "Lat2-Terminus16";
+    keyMap = "us";
+  };
+
+  environment.systemPackages = with pkgs; [
+    curl
+    htop
+    git
+    tree
+    dig
+    htop
+    gnumake
+  ];
+
+  system.copySystemConfiguration = true;
+  system.stateVersion = "23.05"; # don't change this, lol
   boot.loader.grub.enable = true;
   boot.loader.grub.device = "/dev/vda";
 
+#  services.cgit = {
+#    "beepboop.systems" = {
+#      extraConfig = ''
+#      	root-desc="testing"
+#
+#      	section=main
+#	repo.url=dot_testing
+#	repo.path=/var/lib/git/dot_testing
+#	repo.desc=configuration for NixOS/Linux systems
+#	repo.owner=rndusr
+#
+#      	readme=:README.md
+#      '';
+#      enable = true;
+#    };
+#  };
+
   networking.hostName = "netbox";
 
   services.radicale = {
@@ -91,15 +130,6 @@
     extraGroups = [ "wheel" "docker" ];
   };
 
-  users.users.paperlesspassthrough = {
-    isNormalUser = true;
-  };
-
-  environment.systemPackages = with pkgs; [
-    neovim
-    # nothing more needed, at the moment
-  ];
-
   services.openssh = {
     enable = true;
     ports = [55555];
@@ -110,14 +140,11 @@
   services.vaultwarden.enable = true;
   services.vaultwarden.config = {
     DOMAIN = "https://bitwarden.beepboop.systems";
-#	SIGNUPS_ALLOWED = false;
+    SIGNUPS_ALLOWED = false;
-	ADMIN_TOKEN = "an_amazing_token_xd";
   };
 
   networking.usePredictableInterfaceNames = false;
 
-  services.nixosmail.enable = true;
-
   services.gitea = {
     enable = true;
     appName = "crappy code"; # Give the site a name
@@ -164,12 +191,6 @@
     locations."/".proxyPass = "http://localhost:3001";
   };
 
-  services.nginx.virtualHosts."paperless.beepboop.systems" = {
-    forceSSL = true;
-    enableACME = true;
-    locations."/".proxyPass = "http://localhost:3004";
-  };
-
   services.nginx.virtualHosts."bit.beepboop.systems" = {
     forceSSL = true;
     enableACME = true;
@@ -220,19 +241,19 @@
     email = "nickforanick@protonmail.com";
   };
 
-  services.roundcube = {
+#  services.roundcube = {
-    enable = true;
+#    enable = true;
-    # this is the url of the vhost, not necessarily the same as the fqdn of
+#    # this is the url of the vhost, not necessarily the same as the fqdn of
-    # the mailserver
+#    # the mailserver
-    hostName = "cube.beepboop.systems";
+#    hostName = "cube.beepboop.systems";
-    extraConfig = ''
+#    extraConfig = ''
-      # starttls needed for authentication, so the fqdn required to match
+#      # starttls needed for authentication, so the fqdn required to match
-      # the certificate
+#      # the certificate
-      $config['smtp_server'] = "tls://${config.mailserver.fqdn}";
+#      $config['smtp_server'] = "tls://${config.mailserver.fqdn}";
-      $config['smtp_user'] = "%u";
+#      $config['smtp_user'] = "%u";
-      $config['smtp_pass'] = "%p";
+#      $config['smtp_pass'] = "%p";
-    '';
+#    '';
-  };
+#  };
 
   services.nginx.virtualHosts."roundcube.beepboop.systems" = {
     forceSSL = true;
@@ -250,14 +271,4 @@
     enable = true;
     allowedTCPPorts = [ 5232 55555 22 80 443 ];
   };
-
-#  services.paperless = {
-#    enable = true;
-#    passwordFile = "/etc/paperless-password";
-#    port = 3004;
-#    address = "localhost";
-#    extraConfig = {
-#      PAPERLESS_URL = "https://paperless.beepboop.systems";
-#    };
-#  };
 }

boxes/netbox/hardware-configuration.nix

@@ -0,0 +1,37 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports = [ ];
+
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "sr_mod" "virtio_blk" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/a57b82ca-7bfd-458e-b3e8-4962511cc0b8";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/DF39-1ECE";
+      fsType = "vfat";
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/57fbd850-1ced-4e21-9e52-4f3b529c61b0"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens3.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  virtualisation.hypervGuest.enable = true;
+}

boxes/virtbox.nix

@@ -1,12 +0,0 @@
-{ lib, config, pkgs, ...}:
-
-{
-  imports = [
-    ../common/desktop.nix
-  ];
-
-  boot.loader.grub.enable = true;
-  boot.loader.grub.device = "/dev/vda";
-
-  networking.hostName = "virtbox";
-}

boxes/virtbox/default.nix

@@ -0,0 +1,18 @@
+{ lib, config, pkgs, ...}:
+
+{
+  imports = [
+    ./hardware-configuration.nix
+    ../../modules/bootstrap.nix
+    ../../modules/common.nix
+    ../../modules/x11.nix
+    ../../modules/discord.nix
+  ];
+
+  boot.loader.grub.enable = true;
+  boot.loader.grub.device = "/dev/vda";
+
+  networking.hostName = "virtbox";
+
+  system.stateVersion = "23.11";
+}

boxes/virtbox/hardware-configuration.nix

@@ -0,0 +1,31 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "sr_mod" "virtio_blk" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/7b70ab88-296c-4737-90b2-267cb2432dc1";
+      fsType = "ext4";
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp1s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

boxes/virtbox/home.nix

@@ -0,0 +1,9 @@
+{ lib, inputs, config, pkgs, home, ... }:
+
+{
+  imports = [
+    ../../home/x11.nix
+  ];
+
+  home.stateVersion = "23.11";
+}

boxes/x230t/default.nix

@@ -0,0 +1,42 @@
+{ lib, config, pkgs, ...}:
+
+{
+  imports = [
+    ./hardware-configuration.nix
+    ../../modules/bootstrap.nix
+    ../../modules/common.nix
+    ../../modules/x11.nix
+    ../../modules/tlp.nix
+    ../../modules/media.nix
+    ../../modules/anki.nix
+    ../../modules/power-control.nix
+    ../../modules/adb.nix
+  ];
+
+  environment.systemPackages = with pkgs; [
+    xscreensaver
+    thunderbird
+  ];
+
+  services.udev.extraRules = ''
+    ACTION=="add", SUBSYSTEM=="input", KERNEL=="event[0-20]*", ENV{ID_INPUT_TOUCHSCREEN}=="1", MODE:="0666" GROUP="usr", SYMLINK+="input/touchscreen"
+  '';
+
+  users.users.usr.extraGroups = [ "input" ];
+
+  services.getty.autologinUser = "usr";
+
+  boot.loader = {
+    grub.timeoutStyle = "hidden";
+    timeout = 0;
+    grub.enable = true;
+    grub.device = "/dev/sda";
+  };
+
+  hardware.pulseaudio.enable = true;
+
+
+  networking.hostName = "x230t";
+
+  system.stateVersion = "23.11";
+}

boxes/x230t/hardware-configuration.nix

@@ -0,0 +1,33 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ehci_pci" "ahci" "usb_storage" "sd_mod" "sdhci_pci" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/772f67d6-9434-42f1-aa3e-153e41affe4c";
+      fsType = "ext4";
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s25.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp3s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

boxes/x230t/home.nix

@@ -0,0 +1,10 @@
+{ lib, inputs, config, pkgs, home, ... }:
+
+{
+  imports = [
+    ../../home/x11.nix
+    ../../home/chromium
+  ];
+
+  home.stateVersion = "23.11";
+}

boxes/xps.nix

@@ -1,49 +0,0 @@
-{ lib, config, pkgs, ...}:
-
-{
-  imports = [
-    ../common/desktop.nix
-    ../common/steam.nix
-  ];
-
-  environment.systemPackages = with pkgs; [
-    gnome.cheese
-    musescore
-    libsForQt5.kdenlive
-    xdotool
-    texlive.combined.scheme-full
-    zathura
-    lilypond
-    virt-manager
-#    virtualbox
-    xsane
-    android-studio
-    mpc-cli
-    emacs
-    nyxt
-    cmus
-  ];
-
-#  users.extraGroups.vboxusers.members = [ "usr" ];
-#  virtualisation.virtualbox.host.enable = true;
-#  virtualisation.virtualbox.host.enableExtensionPack = true;
-
-  services.tlp.enable = true;
-
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  services.printing.enable = true;
-  services.avahi.enable = true;
-  services.avahi.nssmdns = true;
-  # for a WiFi printer
-  services.avahi.openFirewall = true;
-
-  networking.nameservers = [ "1.1.1.1" "9.9.9.9" ];
-
-  networking.hostName = "xps";
-
-  virtualisation.libvirtd.enable = true;
-  programs.dconf.enable = true;
-  users.users.usr.extraGroups = [ "libvirtd" ];
-}

builds/flake.lock

@@ -0,0 +1,27 @@
+{
+  "nodes": {
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1703467016,
+        "narHash": "sha256-/5A/dNPhbQx/Oa2d+Get174eNI3LERQ7u6WTWOlR1eQ=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "d02d818f22c777aa4e854efc3242ec451e5d462a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-23.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

builds/flake.nix

@@ -0,0 +1,28 @@
+{
+  inputs.nixpkgs.url = "github:NixOS/nixpkgs/nixos-23.11";
+
+  outputs =
+    { nixpkgs, ... }:
+    let
+      inherit (nixpkgs) lib;
+      withSystem =
+        f:
+        lib.fold lib.recursiveUpdate { } (
+          map f [
+            "x86_64-linux"
+          ]
+        );
+      mkPackages = pkgs: {
+        st = pkgs.callPackage ./st.nix { };
+        rebuild = pkgs.callPackage ./rebuild.nix { };
+        utils = pkgs.callPackage ./utils.nix { };
+      };
+    in
+    withSystem (
+      system: {
+        overlays.default = final: _: mkPackages final;
+
+        packages.${system} = mkPackages nixpkgs.legacyPackages.${system};
+      }
+    );
+}

builds/pash.nix

@@ -1,27 +0,0 @@
-{ stdenv
-, lib
-, bash
-, gnupg
-, makeWrapper
-, fetchgit
-}:
-
-stdenv.mkDerivation rec {
-  pname = "pash";
-  version = "1.00";
-
-  src = fetchgit {
-    url = "https://git.beepboop.systems/rndusr/pash";
-    sha256 = "sha256-0L3N7F4BwVdu4rR5xpUEIHcX/x64Gni8JTUki5kGH24=";
-  };
-
-  nativeBuildInputs = [ makeWrapper gnupg ];
-
-  installPhase = ''
-    mkdir -p $out/bin
-    cp $src/pash $out/bin/pash
-    wrapProgram $out/bin/pash --prefix PATH : ${lib.makeBinPath [ bash ]}
-  '';
-
-  phases = [ "installPhase" ];
-}

builds/rebuild/rebuild

@@ -1,2 +1,6 @@
 cd ~/dot_testing
-sudo nixos-rebuild -I nixos-config=./boxes/$(hostname).nix switch $@
+if [ -f "flake.nix" ]; then
+	sudo nixos-rebuild --flake . switch $@
+else
+	sudo nixos-rebuild -I nixos-config=./boxes/$(hostname).nix switch $@
+fi

builds/st.nix

@@ -12,14 +12,14 @@
 
 stdenv.mkDerivation rec {
   pname = "st";
-  version = "69.19";
+  version = "1.02";
 
   src = fetchgit {
     url = "https://git.beepboop.systems/rndusr/st";
     sha256 = "sha256-zdID1SUnTO/zl90EG8TguBNYYCnrnqFnSLz32kQZbng=";
   };
 
-  nativeBuildInputs = [ pkg-config fontconfig freetype ncurses];
+  nativeBuildInputs = [ pkg-config fontconfig freetype ncurses ];
   buildInputs = [ libX11 libXft ] ++ extraLibs;
 
   buildPhase = ''

builds/utils.nix

@@ -1,35 +1,45 @@
 { stdenv
 , lib
+# for statusbar
+, pkg-config
+, libxcb
+# shell scripts stuff
+, makeWrapper
 , sxhkd
 , bash
 , feh
 , jq
+, ffmpeg
+, fzy
 , figlet
 , curl
+, ytfzf
 , xrandr
-, makeWrapper
 }:
 
 stdenv.mkDerivation rec {
   pname = "utils";
-  version = "1.00";
+  version = "1.01";
 
   src = ./utils;
 
-  nativeBuildInputs = [ makeWrapper ];
+  nativeBuildInputs = [ makeWrapper pkg-config libxcb ];
-  buildInputs = [ bash feh xrandr jq curl ];
+  buildInputs = [ libxcb bash feh xrandr jq curl fzy ytfzf ffmpeg ];
 
-  buildPhase = "";
+  buildPhase = ''
+    ls
+    make
+  '';
 
   installPhase = ''
     mkdir -p $out/bin
 
     for i in $(ls $src/sh); do
       cp $src/sh/$i $out/bin
-      wrapProgram $out/bin/$i --prefix PATH : ${lib.makeBinPath [ sxhkd bash feh xrandr jq figlet curl ]}
+      ln -sf $out/bin/tmenu_run $out/bin/regenerate
+      wrapProgram $out/bin/$i --prefix PATH : ${lib.makeBinPath [ sxhkd bash feh xrandr jq figlet curl fzy ytfzf ffmpeg ]}
     done
+
+    cp c/status/main $out/bin/statusbar
   '';
-
-  phases = [ "buildPhase" "installPhase" ];
 }
-

builds/utils/Makefile

@@ -0,0 +1,3 @@
+.PHONY: main
+main:
+	make -C c/status -f Makefile

builds/utils/c/status/.gitignore

@@ -0,0 +1,2 @@
+main
+*.o

builds/utils/c/status/Makefile

@@ -0,0 +1,9 @@
+LDFLAGS=`pkg-config --cflags --libs xcb`
+CFLAGS=-ggdb -fsanitize=address
+main: battery.o bspwm.o time.o battstatus.o
+
+clean:
+	rm *.o main
+
+run:
+	./main

builds/utils/c/status/README

@@ -0,0 +1,4 @@
+status
+------
+
+a simple statusbar script thing (tm)

builds/utils/c/status/battery.c

@@ -0,0 +1,38 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <string.h>
+#include <fcntl.h>
+
+#include "battery.h"
+#include "common.h"
+
+/* config contains a path to the battery */
+int mod_battery(char *config, char *name, char *pipename) {
+	struct message msg;
+	strcpy(msg.name, name);
+
+	int fd = open(pipename, O_WRONLY);
+	int battery;
+	int recvd;
+
+	chdir("/sys/class/power_supply");
+	chdir(config);
+
+	for(;;) {
+		battery = open("capacity", O_RDONLY);
+		recvd = read(battery, msg.content, 3);
+		msg.content[3] = '\0';
+		if (msg.content[2] == '\n') {
+			msg.content[2] = '\0';
+		}
+		close(battery);
+		write(fd, &msg, sizeof(msg));
+
+		sleep(30);
+	}
+
+	return 0;
+}

builds/utils/c/status/battery.h

@@ -0,0 +1,6 @@
+#ifndef STATUS_BATTERY_H
+#define STATUS_BATTERY_H
+
+int mod_battery(char *config, char *name, char *pipename);
+
+#endif

builds/utils/c/status/battstatus.c

@@ -0,0 +1,48 @@
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <fcntl.h>
+
+#include "battstatus.h"
+#include "common.h"
+
+int mod_battstatus(char *config, char *name, char *pipename) {
+	char status;
+	int battery;
+	struct message msg;
+	strcpy(msg.name, name);
+
+	int fd = open(pipename, O_WRONLY);
+
+	chdir("/sys/class/power_supply");
+	chdir(config);
+
+	for(;;) {
+		battery = open("status", O_RDONLY);
+		read(battery, msg.content, 1);
+		switch(msg.content[0]) {
+			case 'N': /* not charging */
+				msg.content[0] = '-';
+				break;
+			case 'C': /* charging */
+				msg.content[0] = '^';
+				break;
+			case 'D': /* discharging */
+				msg.content[0] = 'U';
+				break;
+			case 'U': /* unknown */
+				msg.content[0] = '?';
+				break;
+			default: /* what's going on? */
+				msg.content[0] = '!';
+				break;
+		}
+		msg.content[1] = '\0';
+		close(battery);
+		write(fd, &msg, sizeof(msg));
+
+		sleep(30);
+	}
+
+	return 0;
+}

builds/utils/c/status/battstatus.h

@@ -0,0 +1,6 @@
+#ifndef STATUS_BATTSTAT_H
+#define STATUS_BATTSTAT_H
+
+int mod_battstatus(char *config, char *name, char *pipename);
+
+#endif

builds/utils/c/status/bspwm.c

@@ -0,0 +1,142 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <xcb/xcb.h>
+#include <fcntl.h>
+
+#include "bspwm.h"
+#include "common.h"
+
+const char subscribe[] = "subscribe";
+
+int get_socket(void) {
+	struct sockaddr_un sock;
+	char *host;
+	int displaynumber, screennumber;
+	int fd;
+
+	xcb_parse_display(NULL, &host, &displaynumber, &screennumber);
+
+	sock.sun_family = AF_UNIX;
+	snprintf(
+		sock.sun_path,
+		sizeof(sock.sun_path), "/tmp/bspwm%s_%i_%i-socket",
+		host, displaynumber, screennumber
+	);
+
+	free(host);
+
+	fd = socket(AF_UNIX, SOCK_STREAM, 0);
+	if (connect(
+		fd,
+		(struct sockaddr *) &sock,
+		sizeof(sock)
+	) == -1) {
+		return -1;
+	} else {
+		return fd;
+	}
+}
+
+int should_be_shown(char c) {
+	return c == 'O' || c == 'o' || c == 'F' || c == 'U' || c == 'u';
+}
+
+int is_a_desktop(char c) {
+	return c == 'O' || c == 'o' || c == 'F' || c == 'f' || c == 'U' || c == 'u';
+}
+
+/* XXX: this function has the potential to buffer overflow by ONE BYTE.
+ * probably fix this? */
+void print_desktop_status(char *in, char *out, int outlen) {
+	int written;
+	int i;
+	char c;
+
+	/* flags */
+	int read_colon;
+	int skip_to_next_colon;
+	int read_until_colon;
+	int is_first_desktop;
+	int last_was_desktop;
+
+	i = 0;
+	written = 0;
+	read_colon = 1;
+	skip_to_next_colon = 0;
+	read_until_colon = 0;
+	is_first_desktop = 1;
+	last_was_desktop = 0;
+
+	for(;;) {
+		c = in[i];
+
+		if(!c) break;
+		if(written == outlen) break;
+
+		if (skip_to_next_colon) {
+			if (c == ':') {
+				skip_to_next_colon = 0;
+				read_until_colon = 0;
+				read_colon = 1;
+			} else if (read_until_colon) {
+				out[written] = c;
+				written++;
+			}
+		} else if (read_colon && should_be_shown(c)) {
+			if (!is_first_desktop) {
+				out[written] = ' ';
+				written++;
+			}
+
+			switch(c) {
+				case 'O':
+				case 'F': /* fallthrough */
+					out[written] = '*';
+					written++;
+					break;
+			}
+
+			skip_to_next_colon = 1;
+			read_until_colon = 1;
+			read_colon = 0;
+			is_first_desktop = 0;
+			last_was_desktop = 1;
+		} else if (read_colon && is_a_desktop(c)) {
+			last_was_desktop = 1;
+		} else {
+			if(last_was_desktop) {
+				break;
+			}
+		}
+		i++;
+	}
+
+	out[written] = '\0';
+}
+
+int mod_bspwm(char *config, char *name, char *pipename) {
+	struct message msg;
+	int fd, bspcfd;
+	char in[BUFFER_SIZE];
+
+	strcpy(msg.name, name);
+	msg.flags = 0;
+
+	fd = open(pipename, O_WRONLY);
+	bspcfd = get_socket();
+
+	send(bspcfd, subscribe, sizeof(subscribe), 0);
+
+	for(;;) {
+		int recvd = recv(bspcfd, in, BUFFER_SIZE, 0);
+		print_desktop_status(in, msg.content, 512);
+		write(fd, &msg, sizeof(msg));
+		memset(msg.content, 0, 512);
+	}
+
+	return 0;
+}

builds/utils/c/status/bspwm.h

@@ -0,0 +1,6 @@
+#ifndef STATUS_BSPWM_H
+#define STATUS_BSPWM_H
+
+int mod_bspwm(char *config, char *name, char *pipename);
+
+#endif

builds/utils/c/status/common.h

@@ -0,0 +1,21 @@
+#ifndef STATUS_COMMON_H
+#define STATUS_COMMON_H
+
+#define LENGTH(x)	sizeof(x) / sizeof(x[0])
+#define BUFFER_SIZE 512
+
+struct module {
+	int (*fork_callback)(char *config, char *name, char *pipename);
+	char name[16];
+	char config[512];
+	char buffer[512];
+	int buflen;
+};
+
+struct message {
+	int flags;
+	char name[16];
+	char content[512];
+};
+
+#endif

builds/utils/c/status/main.c

@@ -0,0 +1,91 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/un.h>
+#include <time.h>
+#include <fcntl.h>
+
+#include <xcb/xcb.h>
+
+#include <string.h>
+
+#include "common.h"
+#include "battery.h"
+#include "battstatus.h"
+#include "bspwm.h"
+#include "time.h"
+
+struct module mods[] = {
+	{mod_battery, "battery", "BAT0", { '\0' }},
+	{mod_battstatus, "battstatus", "BAT0", { '\0' }},
+	{mod_time, "time", "", { '\0' }},
+/*	{mod_bspwm, "bspwm", "", { '\0' }}, not working at the moment */
+};
+
+void create_module_proc(int index, char *pipename) {
+	pid_t pid = fork();
+
+	if (pid == 0) { /* we're the child */
+		mods[index].fork_callback(
+			mods[index].config,
+			mods[index].name,
+			pipename
+		);
+	}
+}
+
+void create_module_procs(char *pipename) {
+	for(int i = 0; i < LENGTH(mods); i++) {
+		create_module_proc(i, pipename);
+	}
+}
+
+void redraw() {
+	/* get the progress' module's value, convert it to int, and then
+	 * figure out how much of the screen should be shaded in */
+
+	printf("\033[H\033[2J");
+	for(int i = 0; i < LENGTH(mods); i++) {
+		if (i == 0) printf("%s ", mods[i].buffer);
+		else printf("| %s ", mods[i].buffer);
+	}
+
+	fflush(stdout);
+}
+
+static char NAMED_PIPE[] = "/home/usr/.cache/statusbar_pipe";
+
+int main(void) {
+	char pipename[BUFFER_SIZE];
+	srand(time(NULL));
+	strcpy(pipename, &NAMED_PIPE);
+	pipename[sizeof(NAMED_PIPE) - 1] = 'A' + (rand() % 26);
+	pipename[sizeof(NAMED_PIPE)] = 'A' + (rand() % 26);
+	pipename[sizeof(NAMED_PIPE) + 1] = '\0';
+	mkfifo(pipename, 0666);
+	int fd = open(pipename, O_RDWR);
+	struct message msg;
+
+	create_module_procs(pipename);
+
+	for (;;) {
+		int ret = read(fd, &msg, sizeof(msg));
+		if(ret < 0) {
+			printf("error while reading message from child\n");
+		}
+
+		for(int i = 0; i < LENGTH(mods); i++) {
+			if(strcmp(mods[i].name, msg.name) == 0) {
+				mods[i].buflen = strlen(msg.content);
+				strcpy(mods[i].buffer, msg.content);
+				redraw();
+				break;
+			}
+		}
+	}
+
+	return 0;
+}

builds/utils/c/status/shell.nix

@@ -0,0 +1,9 @@
+with import <nixpkgs> {};
+ pkgs.mkShell {
+   nativeBuildInputs = [
+    gdb
+    gnumake
+    pkg-config
+    xorg.libxcb
+   ];
+ }

builds/utils/c/status/time.c

@@ -0,0 +1,27 @@
+#include <unistd.h>
+#include <fcntl.h>
+#include <time.h>
+#include <string.h>
+
+#include "common.h"
+#include "time.h"
+
+int mod_time(char *config, char *name, char *pipename) {
+	struct message msg;
+	time_t now;
+	struct tm *tm;
+	int fd;
+
+	strcpy(msg.name, name);
+	msg.flags = 0;
+	fd = open(pipename, O_WRONLY);
+
+	for(;;) {
+		time(&now);
+		tm = localtime(&now);
+		strftime(msg.content, 512, "%H:%M", tm);
+		write(fd, &msg, sizeof(msg));
+
+		sleep(60);
+	}
+}

builds/utils/c/status/time.h

@@ -0,0 +1,6 @@
+#ifndef STATUS_TIME_H
+#define STATUS_TIME_H
+
+int mod_time(char *config, char *name, char *pipename);
+
+#endif

builds/utils/sh/capture

@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # get screen info and temporary file
-tmp=$(mktemp)
+tmp=$(mktemp -d)
 res=$(xrandr |
 	grep ' connected' |
 	awk -F' ' '{print $1 " " $4}' |
@@ -11,7 +11,7 @@ res=$(xrandr |
 
 # still or motion
 medium=$(printf ".mp4\n.png\n" | fzy)
-output="$tmp$medium"
+output="$tmp/main$medium"
 
 # capture
 case "$medium" in

builds/utils/sh/disp

@@ -1,24 +1,50 @@
 #!/bin/sh
 
+find_card_pci() {
+	[ -z $pci_path ] && pci_path=$(find /sys/devices | \
+		grep edid | \
+		cut -d/ -f1-6
+	)
+}
+
+assert_edid() {
+	find_card_pci
+
+	out=$(sha256sum ${pci_path}/card0/card0-$1/edid | \
+		cut -d' ' -f1)
+
+	[ "$out" = "$2" ] && return 0 || return 1
+}
+
 exists() {
 	xrandr | grep ' connected' | grep -c "${1}"
 }
 
-if [ ! "$(hostname)" = "mainsail" ]; then
+case "$(hostname)" in
-	bspc monitor eDP-1 -d 1 2 3 4 5 6 7 8 9
+	"mainsail")
-fi
+		echo "mainsail"
-
-if [ "$(exists "DP-1")" -gt 1 ]; then
-	printf "two"
-	bspc monitor DP-1 -s eDP-1
-	xrandr --output eDP-1 --off
-	exit 0
-fi
-
-if [ "$(hostname)" = "mainsail" ]; then
-	# this is a tower, so there's only one configuration
-	printf "mainsail detected\n"
 		xrandr --output VGA-1 --left-of HDMI-1
 		bspc monitor VGA-1 -d 1 3 5 7 9
 		bspc monitor HDMI-1 -d 2 4 6 8 0
-fi
+		;;
+	"x230t")
+		echo "x230t"
+		if
+			assert_edid "VGA-1" "35737dc483d2c3b1b20ea2343ce13c6c42d115febdc9634f8437e1b9f7fd3f5c" &&
+			assert_edid "HDMI-A-1" "01887cbd23d74201e489a6334656f7db73a7b7f732a738a9f1ee2d53389f7817";
+		then
+			echo "docked"
+			xrandr --output LVDS-1 --primary --mode 1366x768 --pos 1194x1080 --rotate normal \
+				--output VGA-1 --mode 1920x1080 --pos 0x0 --rotate normal \
+				--output HDMI-1 --mode 1920x1080 --pos 1920x0 --rotate normal \
+				--output DP-1 --off \
+				--output HDMI-2 --off \
+				--output DP-2 --off
+			bspc monitor LVDS-1 -d 1 4 7
+			bspc monitor VGA-1 -d 2 5 8
+			bspc monitor HDMI-1 -d 3 6 9
+		else
+			bspc monitor LVDS-1 -d 1 2 3 4 5 6 7 8 9
+		fi
+		;;
+esac

builds/utils/sh/mode

@@ -1,4 +1,13 @@
 # mode - change the current effective sxhkd configuration
 
-pkill sxhkd
+if [ -n "$1" ]; then
-sxhkd -c ~/.config/sxhkd/$1 & disown
+	pkill sxhkd
+	sxhkd -c ~/.config/sxhkd/$1 & disown
+	[ -f "~/.config/sxhkd/$1.sh ] && ~/.config/sxhkd/$1.sh
+
+	exit
+fi
+
+# we need a menu
+choice=$(ls ~/.config/sxhkd | tmenu)
+$0 $choice

builds/utils/sh/statuswrap

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+geos=$(
+	xrandr | \
+	grep ' connected' | \
+	grep -o '[0-9]*x[0-9]*+[0-9]*+[0-9]*' | \
+	awk -F'[x+]' '{print $1 "x20+" $3 "+" $4}'
+)
+
+pkill statusbar
+
+for i in $geos; do
+	st -c statusbar -p -g "$i" -e statusbar & disown
+done

builds/utils/sh/wallpaper

@@ -1,32 +0,0 @@
-#!/bin/sh
-
-WALLDIR="${HOME}/.local/share/wallpapers"
-BASECMD="feh --no-fehbg --bg-fill"
-
-generate_wall () {
-  GENWALL=$( \
-    ls "$WALLDIR" | \
-    grep "." | \
-    shuf -n 1
-  )
-  GENWALL="${WALLDIR}/${GENWALL}"
-}
-wall () {
-  generate_wall
-  while [ "${GENWALL}" = "${1}" ]; do
-    generate_wall
-  done
-}
-displays () {
-	displays=$(xrandr | grep -c ' connected')
-}
-
-cmd=""
-displays
-for i in $(seq 1 "$displays"); do
-  wall "${tmp}"
-  tmp="${GENWALL}"
-  cmd="${cmd} ${GENWALL}"
-done
-eval "${BASECMD}" "${cmd}"
-exit 0

common/desktop.nix

@@ -1,265 +0,0 @@
-{ lib, config, pkgs, ...}:
-
-let
-  home-manager = builtins.fetchTarball {
-    url = "https://github.com/nix-community/home-manager/archive/release-23.11.tar.gz";
-    sha256 = "16078fwcmqq41dqfnm124xxm8l6zykvqlj1kzgi0fvfil4y86slm";
-  };
-  customPolybar = pkgs.polybar.override {
-    alsaSupport = true;
-    pulseSupport = true;
-  };
-in {
-  imports = [
-    "${builtins.fetchTarball "https://github.com/Mic92/sops-nix/archive/master.tar.gz"}/modules/sops"
-    (import "${home-manager}/nixos")
-    ./main.nix
-  ];
-
-  services.xserver = {
-    enable = true;
-    libinput.enable = true;
-    layout = "us";
-
-    displayManager.sx.enable = true;
-  };
-
-  sound.enable = true;
-  hardware.pulseaudio.enable = true;
-
-  nixpkgs.config = {
-    allowUnfree = true;
-    permittedInsecurePackages = [
-      "libxls-1.6.2"
-    ];
-  };
-
-  environment.systemPackages = with pkgs; [
-    sx
-    fzy
-    xclip
-    xcape
-    ffmpeg
-    man-pages
-
-    ncmpcpp
-    pciutils
-    tor-browser-bundle-bin
-    xscreensaver
-    ncpamixer
-    gpick
-    calcurse
-    dunst
-    libnotify
-    tig
-    neomutt
-    mpv
-    yt-dlp
-    zathura
-    tmux
-    lynx
-    feh
-    elinks
-    sc-im
-    ledger
-    remind
-    python3
-    pinentry-curses
-    magic-wormhole
-    xbrightness
-    xdotool
-    figlet
-    neomutt
-
-    unzip
-    lua-language-server
-    rnix-lsp
-    python311Packages.jedi-language-server
-
-    ungoogled-chromium
-    discord
-
-    customPolybar
-    (pkgs.callPackage ../builds/utils.nix {})
-    (pkgs.callPackage ../builds/st.nix {})
-    (pkgs.callPackage ../builds/pash.nix {})
-  ];
-
-  fonts.packages = with pkgs; [
-    fantasque-sans-mono
-  ];
-
-  programs.gnupg.agent = {
-    enable = true;
-    pinentryFlavor = "gtk2";
-    enableSSHSupport = true;
-  };
-
-  programs.firefox = {
-    enable = true;
-    policies = {
-      DisableFirefoxStudies = true;
-      DisablePocket = true;
-      DisableTelemetry = {
-        Cryptomining = true;
-        Fingerprinting = true;
-        EmailTracking = true;
-      };
-      DisableFirefoxAccounts = true;
-      DisableFirefoxScreenshots = true;
-      DisableSetDesktopBackground = true;
-      DisplayBookmarksToolbar = "never";
-      DontCheckDefaultBrowser = true;
-      Extensions = {
-        Install = [
-          "https://addons.mozilla.org/firefox/downloads/file/3812704/umatrix-1.4.4.xpi"
-          "https://addons.mozilla.org/firefox/downloads/file/3824639/gruvbox_true_dark-2.0.xpi"
-          "https://addons.mozilla.org/firefox/downloads/file/4128489/darkreader-4.9.64.xpi"
-          "https://addons.mozilla.org/firefox/downloads/file/4036604/tridactyl_vim-1.23.0.xpi"
-          "https://addons.mozilla.org/firefox/downloads/file/4098688/user_agent_string_switcher-0.5.0.xpi"
-        ];
-      };
-      FirefoxHome = {
-        Pocket = false;
-        Snippets = false;
-        TopSites = false;
-        SponsoredTopSites = false;
-      };
-      UserMessaging = {
-        ExtensionRecommendations = false;
-        SkipOnboarding = true;
-        MoreFromMozilla = false;
-        UrlbarInterventions = false;
-        WhatsNew = false;
-      };
-      EnableTrackingProtection = true;
-      OverrideFirstRunPage = "";
-      OverridePostUpdatePage = "";
-      PasswordManagerEnabled = false;
-      SearchSuggestEnabled = false;
-    };
-    nativeMessagingHosts.packages = [
-      pkgs.tridactyl-native
-    ];
-  };
-
-  services.mpd = {
-    enable = true;
-    musicDirectory = "/home/usr/music";
-    user = "usr";
-    extraConfig = ''
-      audio_output {
-        type "pulse"
-        name "Pulseaudio"
-      }
-      audio_output {
-        type "alsa"
-        name "mpd alsamixer-output"
-      }
-    '';
-  };
-
-  users.users.usr = {
-    isNormalUser = true;
-    extraGroups = [ "wheel" ];
-    initialPassword = "usr";
-    packages = with pkgs; [
-      firefox
-      tree
-      bspwm
-      sxhkd
-    ];
-  };
-
-
-  # honking impure, but who's counting anyway?
-  system.activationScripts.test-script.text = ''
-    #!${pkgs.bash}/bin/bash
-
-    if [ "$(${pkgs.coreutils}/bin/whoami)" = "usr"]; then
-      ${pkgs.coreutils}/bin/mkdir -p /home/usr/git
-      ${pkgs.git}/bin/git https://git.beepboop.systems/rndusr/dot /home/usr/git/dot
-      ${pkgs.git}/bin/git https://git.beepboop.systems/rndusr/privdata /home/usr/git/privdata
-    fi
-  '';
-
-  home-manager.users.usr = {
-    home.stateVersion = "23.05";
-
-    programs.neovim = {
-      enable = true;
-      extraLuaPackages = luaPkgs: with luaPkgs; [ luaexpat ];
-      extraPackages = [ pkgs.sqlite ];
-    };
-
-    home.file = {
-      ".config/bash" = {
-        source = ../config/bash;
-        recursive = true;
-      };
-      ".config/bspwm" = {
-        source = ../config/bspwm;
-        recursive = true;
-      };
-      ".config/git" = {
-        source = ../config/git;
-        recursive = true;
-      };
-      ".config/htop" = {
-        source = ../config/htop;
-        recursive = true;
-      };
-      ".config/nvim" = {
-        source = ../config/nvim;
-        recursive = true;
-      };
-      ".config/python" = {
-        source = ../config/python;
-        recursive = true;
-      };
-      ".config/polybar" = {
-        source = ../config/polybar;
-        recursive = true;
-      };
-      ".config/sx" = {
-        source = ../config/sx;
-        recursive = true;
-      };
-      ".config/sxhkd" = {
-        source = ../config/sxhkd;
-        recursive = true;
-      };
-      ".config/tridactyl" = {
-        source = ../config/tridactyl;
-        recursive = true;
-      };
-      ".config/zathura" = {
-        source = ../config/zathura;
-        recursive = true;
-      };
-      ".local/share/wallpapers" = {
-        source = ../wallpapers;
-        recursive = true;
-      };
-      ".local/share/gnupg" = {
-        source = ../config/gnupg;
-        recursive = true;
-      };
-      ".config/emacs" = {
-        source = ../config/emacs;
-        recursive = true;
-      };
-    };
-  };
-
-  environment.etc = {
-    "profile.local" = {
-      text = "source /home/usr/.config/bash/profile";
-    };
-    "bashrc.local" = {
-      text = "source /home/usr/.config/bash/bashrc";
-    };
-  };
-
-  programs.ssh.askPassword = "";
-}

common/gaming.nix

@@ -1,9 +0,0 @@
-{ config, lib, pkgs, ... }:
-{
-  environment.systemPackages = with pkgs; [
-    steam-run
-    prismlauncher
-    xonotic
-    minetest
-  ];
-}

common/main.nix

@@ -1,37 +0,0 @@
-{ lib, config, pkgs, ... }:
-
-let
-my_neovim = pkgs.neovim.overrideAttrs (oldAttrs: {
-  buildInputs = oldAttrs.buildInputs or [] ++ [ pkgs.luajitPackages.luaexpat ];
-});
-in {
-  imports =
-    [
-      ../hardware-configuration.nix # include the results of the hardware scan
-    ];
-
-  networking.networkmanager.enable = true;
-
-  time.timeZone = "America/Chicago";
-
-  i18n.defaultLocale = "en_US.UTF-8";
-  console = {
-    font = "Lat2-Terminus16";
-    keyMap = "us";
-  };
-
-  environment.systemPackages = with pkgs; [
-    curl
-    htop
-    git
-    tree
-    dig
-    htop
-    gnumake
-
-    (pkgs.callPackage ../builds/rebuild.nix {})
-  ];
-
-  system.copySystemConfiguration = true;
-  system.stateVersion = "23.05"; # don't change this, lol
-}

flake.lock

@@ -0,0 +1,239 @@
+{
+  "nodes": {
+    "blobs": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1604995301,
+        "narHash": "sha256-wcLzgLec6SGJA8fx1OEN1yV/Py5b+U5iyYpksUY/yLw=",
+        "owner": "simple-nixos-mailserver",
+        "repo": "blobs",
+        "rev": "2cccdf1ca48316f2cfd1c9a0017e8de5a7156265",
+        "type": "gitlab"
+      },
+      "original": {
+        "owner": "simple-nixos-mailserver",
+        "repo": "blobs",
+        "type": "gitlab"
+      }
+    },
+    "firefox-addons": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "dir": "pkgs/firefox-addons",
+        "lastModified": 1705534402,
+        "narHash": "sha256-mOWT45HLd8dm8FJNmrgngotE5NRJ+2arz65m1Kk0LBA=",
+        "owner": "rycee",
+        "repo": "nur-expressions",
+        "rev": "6a928ce99e4ccb09e59c1f58052bd65027249c8a",
+        "type": "gitlab"
+      },
+      "original": {
+        "dir": "pkgs/firefox-addons",
+        "owner": "rycee",
+        "repo": "nur-expressions",
+        "type": "gitlab"
+      }
+    },
+    "flake-compat": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1668681692,
+        "narHash": "sha256-Ht91NGdewz8IQLtWZ9LCeNXMSXHUss+9COoqu6JLmXU=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "009399224d5e398d03b22badca40a37ac85412a1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "locked": {
+        "lastModified": 1629284811,
+        "narHash": "sha256-JHgasjPR0/J1J3DRm4KxM4zTyAj4IOJY8vIl75v/kPI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "c5d161cc0af116a2e17f54316f0bf43f0819785c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1705476964,
+        "narHash": "sha256-W5OK1fnj4qdn1HWOlxV2S3YiUvfaVjQM5ldWVpGV1fs=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "85c3b600f660abd86e94cbcd1c46733943197a07",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-23.11",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1705331948,
+        "narHash": "sha256-qjQXfvrAT1/RKDFAMdl8Hw3m4tLVvMCc8fMqzJv0pP4=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "b8dd8be3c790215716e7c12b247f45ca525867e2",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-23.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-22_11": {
+      "locked": {
+        "lastModified": 1669558522,
+        "narHash": "sha256-yqxn+wOiPqe6cxzOo4leeJOp1bXE/fjPEi/3F/bBHv8=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "ce5fe99df1f15a09a91a86be9738d68fadfbad82",
+        "type": "github"
+      },
+      "original": {
+        "id": "nixpkgs",
+        "ref": "nixos-22.11",
+        "type": "indirect"
+      }
+    },
+    "nixpkgs-23_05": {
+      "locked": {
+        "lastModified": 1684782344,
+        "narHash": "sha256-SHN8hPYYSX0thDrMLMWPWYulK3YFgASOrCsIL3AJ78g=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "8966c43feba2c701ed624302b6a935f97bcbdf88",
+        "type": "github"
+      },
+      "original": {
+        "id": "nixpkgs",
+        "ref": "nixos-23.05",
+        "type": "indirect"
+      }
+    },
+    "nixpkgs-23_11": {
+      "locked": {
+        "lastModified": 1701539137,
+        "narHash": "sha256-nVO/5QYpf1GwjvtpXhyxx5M3U/WN0MwBro4Lsk+9mL0=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "933d7dc155096e7575d207be6fb7792bc9f34f6d",
+        "type": "github"
+      },
+      "original": {
+        "id": "nixpkgs",
+        "ref": "nixos-23.11",
+        "type": "indirect"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1670751203,
+        "narHash": "sha256-XdoH1v3shKDGlrwjgrNX/EN8s3c+kQV7xY6cLCE8vcI=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "64e0bf055f9d25928c31fb12924e59ff8ce71e60",
+        "type": "github"
+      },
+      "original": {
+        "id": "nixpkgs",
+        "ref": "nixos-unstable",
+        "type": "indirect"
+      }
+    },
+    "root": {
+      "inputs": {
+        "firefox-addons": "firefox-addons",
+        "home-manager": "home-manager",
+        "nixpkgs": "nixpkgs",
+        "simple-nixos-mailserver": "simple-nixos-mailserver",
+        "utilpkg": "utilpkg"
+      }
+    },
+    "simple-nixos-mailserver": {
+      "inputs": {
+        "blobs": "blobs",
+        "flake-compat": "flake-compat",
+        "nixpkgs": "nixpkgs_2",
+        "nixpkgs-22_11": "nixpkgs-22_11",
+        "nixpkgs-23_05": "nixpkgs-23_05",
+        "nixpkgs-23_11": "nixpkgs-23_11",
+        "utils": "utils"
+      },
+      "locked": {
+        "lastModified": 1703023684,
+        "narHash": "sha256-XQU4OaacV0F2tf9cNAvIMqlC0HBIrAtvb0MLjIHt+7M=",
+        "owner": "simple-nixos-mailserver",
+        "repo": "nixos-mailserver",
+        "rev": "4bfb8eb058f098302c97b909df2d019926e11220",
+        "type": "gitlab"
+      },
+      "original": {
+        "owner": "simple-nixos-mailserver",
+        "ref": "nixos-23.11",
+        "repo": "nixos-mailserver",
+        "type": "gitlab"
+      }
+    },
+    "utilpkg": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1,
+        "narHash": "sha256-wGl3ZnqjhpAEpTkzgjWxgsbmGX9c7TPCM4I0okuOYFE=",
+        "path": "/nix/store/z62lv62z8yn2vfgxk06aqdr7i6wmk2v0-source/builds",
+        "type": "path"
+      },
+      "original": {
+        "path": "/nix/store/z62lv62z8yn2vfgxk06aqdr7i6wmk2v0-source/builds",
+        "type": "path"
+      }
+    },
+    "utils": {
+      "locked": {
+        "lastModified": 1605370193,
+        "narHash": "sha256-YyMTf3URDL/otKdKgtoMChu4vfVL3vCMkRqpGifhUn0=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "5021eac20303a61fafe17224c087f5519baed54d",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

flake.nix

@@ -0,0 +1,96 @@
+{
+  description = "rndusr's nixos flake";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-23.11";
+    home-manager = {
+      url = "github:nix-community/home-manager/release-23.11";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    firefox-addons = {
+      url = "gitlab:rycee/nur-expressions?dir=pkgs/firefox-addons";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    utilpkg = {
+      url = "./builds";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    simple-nixos-mailserver = {
+      url = "gitlab:simple-nixos-mailserver/nixos-mailserver/nixos-23.11";
+    };
+  };
+
+  outputs = { self, nixpkgs, home-manager, firefox-addons, simple-nixos-mailserver, utilpkg, ... }@inputs: {
+    nixosConfigurations = {
+      netbox = nixpkgs.lib.nixosSystem {
+        system = "x86_64-linux";
+        specialArgs = { inherit inputs; };
+        modules = [
+          ./boxes/netbox
+          simple-nixos-mailserver.nixosModule
+          {
+            mailserver = {
+              enable = true;
+              fqdn = "mail.beepboop.systems";
+              domains = [ "beepboop.systems" ];
+              loginAccounts = {
+                "ryan@beepboop.systems" = {
+                  # nix-shell -p mkpasswd --run 'mkpasswd -sm bcrypt' > /hashed/password/file/location
+                  hashedPasswordFile = "/etc/ryan-beepboop-systemsuser-pass";
+
+                  aliases = [
+                      "info@beepboop.systems"
+                      "postmaster@beepboop.systems"
+                  ];
+                };
+              };
+              certificateScheme = "acme-nginx";
+            };
+          }
+        ];
+      };
+      virtbox = nixpkgs.lib.nixosSystem {
+        system = "x86_64-linux";
+        specialArgs = { inherit inputs; };
+        modules = [
+          ./boxes/virtbox
+
+          home-manager.nixosModules.home-manager {
+            home-manager.useGlobalPkgs = true;
+            home-manager.useUserPackages = true;
+            home-manager.extraSpecialArgs = { inherit inputs; };
+            home-manager.users.usr = import ./boxes/virtbox/home.nix;
+          }
+        ];
+      };
+      x230t = nixpkgs.lib.nixosSystem {
+        system = "x86_64-linux";
+        specialArgs = { inherit inputs; };
+        modules = [
+          ./boxes/x230t
+
+          home-manager.nixosModules.home-manager {
+            home-manager.useGlobalPkgs = true;
+            home-manager.useUserPackages = true;
+            home-manager.extraSpecialArgs = { inherit inputs; };
+            home-manager.users.usr = import ./boxes/x230t/home.nix;
+          }
+        ];
+      };
+      mainsail = nixpkgs.lib.nixosSystem {
+        system = "x86_64-linux";
+        specialArgs = { inherit inputs; };
+        modules = [
+          ./boxes/mainsail
+
+          home-manager.nixosModules.home-manager {
+            home-manager.useGlobalPkgs = true;
+            home-manager.useUserPackages = true;
+            home-manager.extraSpecialArgs = { inherit inputs; };
+            home-manager.users.usr = import ./boxes/mainsail/home.nix;
+          }
+        ];
+      };
+    };
+  };
+}

home/bash/default.nix

@@ -0,0 +1,18 @@
+{ lib, config, pkgs, home, ... }:
+
+{
+  # if we use programs.bash.enable, it creates spurious .bashrc and .profile in
+  # our home directory, which is no good
+  home.packages = with pkgs; [
+    bash
+  ];
+
+  home.file = {
+    ".config/bash/bashrc" = {
+      source = ./bashrc;
+    };
+    ".config/bash/profile" = {
+      source = ./profile;
+    };
+  };
+}

home/bash/profile

@@ -54,3 +54,6 @@ export DBUS_SESSION_BUS_ADDRESS="unix:path=$XDG_RUNTIME_DIR/bus"
 # source the bashrc(s)
 [ -f $HOME/.config/bash/bashrc ] && . $HOME/.config/bash/bashrc
 [ -f $HOME/.bashrc ] && . $HOME/.bashrc
+
+# if we're interactive and the tty is /dev/tty1 then start xorg
+[ "$(tty)" = "/dev/tty1" ] && sx

home/bspwm/bspwmrc

@@ -1,11 +1,26 @@
 #!/bin/sh
 # rndusr's bspwmrc
 
+bspc rule -a st-gpg-menu state=floating
+bspc rule -a statusbar border=off sticky=on state=floating manage=off
+bspc rule -a tmenu-prompt border=on sticky=on state=floating
+bspc rule -a Xmessage border=on state=floating
+bspc rule -a Zathura state=tiled
+bspc rule -a generic-st-window state=floating manage=on sticky=on border=on
+bspc rule -a floating-feh state=floating
+
+set_walls() {
+	for i in $(xrandr | grep ' connected' | cut -d' ' -f1); do
+		xwallpaper --output $i --zoom ~/.local/share/pape.jpg
+	done
+}
+
 # post-wm boilerplate
-wallpaper
 disp
-polybar &
+statuswrap
-dunst &
+set_walls
+pkill xscreensaver
+HOME=".config/xscreensaver" xscreensaver --no-splash &
 
 # set up the color scheme
 bspc config normal_border_color "#161510"
@@ -16,13 +31,5 @@ bspc config pointer_follows_focus true
 bspc config pointer_follows_monitor true
 bspc config focus_follows_pointer true
 
-bspc config window_gap 3
+bspc config window_gap 0
-#bspc config top_padding 20
+bspc config top_padding 20
-
-bspc rule -a st-gpg-menu state=floating
-bspc rule -a statusbar border=off sticky=on state=floating manage=off
-bspc rule -a tmenu-prompt border=on sticky=on state=floating
-bspc rule -a Xmessage border=on state=floating
-bspc rule -a Zathura state=tiled
-bspc rule -a generic-st-window state=floating manage=on sticky=on border=on
-bspc rule -a floating-feh state=floating

home/bspwm/default.nix

@@ -0,0 +1,11 @@
+{ lib, config, pkgs, home, ... }:
+
+{
+  # program activation is managed by nixos config
+
+  home.file = {
+    ".config/bspwm/bspwmrc" = {
+      source = ./bspwmrc;
+    };
+  };
+}

home/chromium/default.nix

@@ -0,0 +1,15 @@
+{ lib, inputs, config, pkgs, home, ... }:
+
+{
+  home.packages = with pkgs; [
+    ungoogled-chromium
+  ];
+
+  programs.chromium = {
+    enable = true;
+    package = pkgs.ungoogled-chromium;
+    extensions = [
+      { id = "ecnphlgnajanjnkcmbpancdjoidceilk"; }
+    ];
+  };
+}