jsfw

Utility to forward evdev devices over network through a tcp connection.

Building

Dependencies

None apart from libc, libmath, pthreads, and linux headers.

Compiling

Use the makefile, or open it and do things by hand, there's nothing magic in there.

make jsfw

output will be ./jsfw.

Usage

Background

Jsfw works with a server and one or more clients, each client has a configuration and so does the server. The server configuration assigns tags to devices based on a set of filter, for example, you could give the "Controller" tag to devices of a certain vendor and product id. The client configuration specifies what the client wants: it is a set of tags as well as a few additional properties for the virtual devices. To illustrate that a little better, a simple setup would have a server with this configuration:

{
    "controllers": [
        {
            "filter": { "vendor": "1234", "product": "0000" },
            "tag": "Controller"
        }
    ],
}

and a client with this one:

{
    "controllers": [
        {
            "tag": "Controller"
        }
    ]
}

This would result in the server picking up any device with the vendor id 1234 and the product id 0000, taging it as a Controller and forwarding it to the client when it connects.

Configuration

Jsfw makes use of two json configurations to dictate the behaviour of both the server and client.

Server

The server configuration specifies some of the server settings, as well as which devices to assign to which tag.

// Any property can be ommitted, unless specified otherwise
// The values listed here are examples
{
    "controllers": [
        {
            // (required) The tag to assign the to devices matching the filter
            "tag": "Joystick",
            // (default: accept any device) Requirements for a device to be assigned the tag
            "filter": {
                // (default: none) Optionally match the uniq of a device, expects a 17 long string of this form
                "uniq": "aa:bb:cc:dd:ee:ff",
                // (default: none) Optionally match the vendor code of the device, expects a 4 long hex string
                "vendor": "054c",
                // (default: none) Optionally match the product code of the device, expects a 4 long hex string
                "product": "abcd",
                // (default: false) Wether to check for a js* entry in the device tree, useful to match only the
                // controller when a device has multiple events (i.e in the case of a ps4 controller one device has
                // a js and is the controller, and another, with the same uniq/vendor/product, is the mouse and keyboard).
                "js": true,
                // (default: none) Optionally match the name of the device
                "name": "Asus keyboard"
            },
            // Additional properties for the jsfw behaviour, some properties may act as a filter.
            "properties": {
                // (default: false) Wether this device can be shared by multiple client
                "duplicate": true,
                // (default: false) Wether the devices are dualshock 4 controllers that can be controlled
                // through the hidraw interface, this allows changing the led colors from the client by writing
                // json to the fifo (see client configuration). If this is enabled, any device whose hidraw interface
                // can't be found will be filtered out
                "ps4_hidraw": true
            }
        }
    ],
    // (default: 1s) Number of seconds between each poll for physical devices
    "poll_interval": 2.5,
    // (default: 2s) Number of seconds to wait for a client's request before closing the connection
    "request_timeout": 10
}

The client configuration specifies what devices the client wants as well as under what name/properties should they appear

// Any property can be ommitted, unless specified otherwise
// The values listed here are examples
{
    "controllers": [
        {
            // (required) Tag of the device to request
            "tag": "Joystick",
            // (default: 6969) Vendor code for the virtual device, expects a 4 long hex string
            "vendor": "dead",
            // (default: 0420) Product code for the virtual device, expects a 4 long hex string
            "product": "beef",
            // (default: "JSFW Virtual Device") Name for the virtual device
            "name": "Emanuel"
        }
    ],
    // (default: "/tmp/jsfw_fifo") Path to the fifo for hidraw
    "fifo_path": "/tmp/gaming",
    // (default: 5s) Number of seconds between retries when connecting to the server
    "retry_delay": 2.5
}

Additionaly messages can be sent to the client's fifo to change the led colors (and more) of ps4_hidraw devices, these take the form:

// Any property can be ommitted, unless specified otherwise
// The values listed here are examples
{
    // (default: 0) Index of the device to send the state to, this is the index in the client configuration controllers list
    "index": 1,
    // (default: [0, 0]) Setting for the rumble, values are in range 0-255 first element is small rumble, second is big
    "rumble": [255, 0],
    // (default: [0, 0]) Setting for led flash, values are in range 0-255, first element is led on, second is led off
    "flash": [0, 255],
    // (default: "#FFFFFF") Hex color for the led
    "led_color": "#FF0000"
}

Execution

To start the server:

./jsfw server [port] [path to config]

To start the client:

./jsfw client [address] [port] [path to config]

Contributing

lol, lmao even. (nah just issues/PR I guess)

5.6 KiB Raw Blame History